Home  Location    About Us    Contact Us   

New NDT Equipment    Used NDT Equipment    Equipment Hire    Products    Calibration Services

DINSEARCH 1-00

The DINSEARCH 1-00 is an electromagnetic system for rapid, high resolution inspection of carbon steel tubes in heat exchangers, coolers, boilers and similar equipment.

Tubes from 15mm to 70mm o.d. in the usual range of wall thicknesses.  A probe is pushed and pulled through each tube in turn and signals are displayed that show the state of the tube.

For each standard o.d. of tube there is a DINSEARCH probe body. Sheaths are fitted to this body to bring its diameter up to suit the bore of the tube. This way, one tube body and its set of interchangeable sheaths will inspect any of the common gauges of tube of the particular o.d. and cope with small amounts of coating on the bore.

Inspection speeds, typically 50 metres per minute, are similar to those achieved in non-ferrous tubes when using conventional eddy-current systems. This is much faster than IRIS ultrasonic systems and has the additional advantages that the tubes do not need to be perfectly clean or filled with water.

Click here to download a PDF of the DINSEARCH 1-00 datasheet

Click here to download a PDF of the DINSEARCH 1-00 Probes datasheet

Please phone, fax or email us for more information on this product.

Back to Top                                                                                                                               This page last updated 04 May 2007

Website designed by Steve Harris (qhs@tvcalx.co.uk) and hosted by Paston Chase