Dinsearch
Showing all 5 results
-
DINSEARCH™ 6-00
DINSEARCH™ 6-00 is a portable, hand-held unit for the measurement of cladding in lined steel pipes.
Designed specifically for metallic protective linings such as Iconel on carbon steel and low alloy steel substrates. Suitable for use in straight pipe and bends, also on the linings of tanks and pressure vessels.
The probe is scanned over the surface of the cladding and the meter gives a continuous read-out of the cladding thickness. The internal encoder in the probe finds distance measurement.
-
DINSEARCH™ 5-00
For use in the pipe mill to measure the thickness of the Inconel lining in the pipe after extrusion. The head carries several sensors in order to detect radial variations in clad thickness, such as eccentricity. Normally 4 sensors are sufficient but up to 8 can be accommodated. (more…)
-
DINSEARCH™ 1-03 (Probe Cooling Unit for use with DINSEARCH™ 1-00 & 2-00 Tube Inspection Equipment)
All DINSEARCH™ tube inspection equipment uses electromagnets to obtain adequate and reliable levels of magnetisation. (more…)
-
DINSEARCH™ 2-00
The DINSEARCH™ 2-00 is a multiple sensor, magnetic flux leakage system, specially developed for the inspection of carbon steel pipes and tubes 50mm to 100mm diameter. (more…)
-
DINSEARCH™ 1-00
The DINSEARCH™ 1-00 is an electromagnetic system for rapid, high resolution inspection of carbon steel tubes in heat exchangers, coolers, boilers and similar equipment. Tubes from 15mm to 70mm o.d. in the usual range of wall thicknesses are easily and quickly inspected using standard probes and close fitting sheaths. (more…)
