Pipe Inspection Equipment
Showing all 8 results
-
CALSIS Laser, Video & ECT Inspection Systems
Since 2009, TVC has been developing and manufacturing bespoke Laser, Video and ECT inspection Systems to client requirements. So far, equipment has been tailored to provide inspection in key areas in pipe welding for the Pipe Manufacturing and Pipeline Welding industries. The systems can be comprised of Video, Eddy Current and Laser components to inspect pipe internals. (more…)
-
ColcheK2
The ColcheK2 system has a digital display, depth measurement and threshold facility (which were not available on the previous system) and has had a complete overhaul of the internal electronics. The ColcheK2 has a one-button facility which eliminates errors in the initial set up, allowing for greater accuracy than was previously available. Based on the eddy current technique, the new unit is lighter, faster to set up and use and gives instant pass / fail indications with the easy to read and colour changing display. (more…)
-
DINSEARCH™ 6-00
DINSEARCH™ 6-00 is a portable, hand-held unit for the measurement of cladding in lined steel pipes.
Designed specifically for metallic protective linings such as Iconel on carbon steel and low alloy steel substrates. Suitable for use in straight pipe and bends, also on the linings of tanks and pressure vessels.
The probe is scanned over the surface of the cladding and the meter gives a continuous read-out of the cladding thickness. The internal encoder in the probe finds distance measurement.
-
DINSEARCH™ 5-00
For use in the pipe mill to measure the thickness of the Inconel lining in the pipe after extrusion. The head carries several sensors in order to detect radial variations in clad thickness, such as eccentricity. Normally 4 sensors are sufficient but up to 8 can be accommodated. (more…)
-
DINSEARCH™ 1-03 (Probe Cooling Unit for use with DINSEARCH™ 1-00 & 2-00 Tube Inspection Equipment)
All DINSEARCH™ tube inspection equipment uses electromagnets to obtain adequate and reliable levels of magnetisation. (more…)
-
DINSEARCH™ 2-00
The DINSEARCH™ 2-00 is a multiple sensor, magnetic flux leakage system, specially developed for the inspection of carbon steel pipes and tubes 50mm to 100mm diameter. (more…)
-
DINSEARCH™ 1-00
The DINSEARCH™ 1-00 is an electromagnetic system for rapid, high resolution inspection of carbon steel tubes in heat exchangers, coolers, boilers and similar equipment. Tubes from 15mm to 70mm o.d. in the usual range of wall thicknesses are easily and quickly inspected using standard probes and close fitting sheaths. (more…)
-
CrackChek
The CrackChek is a simple to use eddy current instrument designed specifically for the detection of cracks in steel structure welds.
The equipment requires no special training or qualifications to use and can accurately locate weld cracking without the need to remove paint and other coatings.
The CrackChek can be used to detect cracks in pipeline welds, structural steel welding and lighting column welds at the swage joint and flange mounting.
